Preslab Underfloor Heating System Installation

We just finished a preslab underfloor heating system installation for a home in Silverdale, Auckland. The is a new home being built, the perfect time to get underfloor heating installed.

Our specialist laid underfloor heating pipe on top of mesh and used wire tie downs to keep the pipe in place.
The system consists of 2x circuits of pipe:
Circuit 1 approx 85 meters
Circuit 2 approx 100 meters

Correct spacing of the pipeĀ  is critical to avoid cold spots and even heat distribution. This is critical for a quality heating system. As you can see in this install, the pipe covers the whole floor very evenly and will ensure there is consistent heating all throughout the house. In general areas such as bedrooms for the lounge the pipe is laid at 200mm centers. Smaller areas such as bathrooms and kitchen are laid at 100-150mm centers. This enables maximum heat output in smaller areas whilst larger areas can be comfortably maintained.

Once the pipes were laid and the manifold and valves installed, the system was pressure tested with water to ensure there are no leaks and that it will operate correctly. It rated at 1000kpa.

pre_slab_underfloor_heating_system_install pre_slab_underfloor_heating

pre_slab_underfloor_heating_system pre_slab_underfloor_heating_system_install_auckland

Are you interested in an underfloor heating system? Underfloor heating is an excellent solution to efficient home central heating. Advantages include the fact that it is completely hidden (no radiators or vents to see), extremely efficient, provides even heating and can be designed specifically for your needs. If you are building a new home or renovating, speak to us about an underfloor heating system now!